Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the CV Joint Boot

Model: (Various brands) Various
Part: CV boot

In this video tutorial, you will learn how to remove and replace the CV joint boot on a generic car. The procedure does not vary much from car to car as the characteristics are essentially the same. First, obtain the new boots: specifically, there are "split" boots that can be fitted without removing many components. Remove the wheel and lift the car with a jack, then cut the old boot and replace it with the new one, gluing the two parts together to secure them! Verify the operation afterwards.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, you will see how to replace a CV joint: first, a technical drawing shows the important measurements to take for purchasing. First, rem…
(Various brands) Various Lift the car with a jack and remove the wheel by unscrewing the bolts. Work on the rear of the vehicle: use a flat screwdriver to break the two metal…
(Various brands) Various In this video, you will learn how CV joint boots work: they are made of flexible rubber, and the driveshaft passes through them, with the larger end …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos