Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Winder Knob

Model: (Various brands) Various
Part: Checks and maintenance

The method shown in the video is universal as the window winder knob is very similar across many models. The knob is not simply pressed in but held in place by a small omega-shaped metal clip. To remove it, a specific tool would theoretically be required, but the tutorial demonstrates how to make one using a sufficiently thick and rigid wire, shaped into a hook. By inserting the tool, you can hook the clip and pull it out. To reposition the new knob, insert the clip into its seat and press the knob against the metal spindle of the door.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Grips and Stabiliser Weights on a Scooter
How to Install Grips and Stabiliser Weights on a Scooter
(Various brands) Various In this video tutorial, you can see how to install grips and stabiliser weights on a scooter. The grips can be removed in several ways: First solutio…
How to Repair the Heated Grip on a BMW Motorcycle
How to Repair the Heated Grip on a BMW Motorcycle
(Various brands) Various Here’s how to repair a heated grip on a BMW: remove the cover to access the connector for the grip’s heating element. Check the continuity of the hea…
How to Replace the Grips on a Tmax Scooter
How to Replace the Grips on a Tmax Scooter
(Various brands) Various In this video tutorial, you will see how to replace the grips on a Tmax scooter. The materials needed for this job are: an 18mm Allen key, a glass cl…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos