Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Extract a Broken Glow Plug

Model: (Various brands) Various
Part: Glow plugs

It can happen that during the removal of a glow plug, the hexagonal element may break off from the body of the glow plug, which then becomes stuck in its seat: there is a specific extraction kit that allows you to remove the glow plug without having to disassemble the cylinder head through a series of steps; once the hexagonal element is removed, use the appropriate guide sockets to drill and eliminate the electrode, then drill the glow plug, paying close attention to the drilling depth (mark the length on the tip with masking tape) and the angle (insert a socket onto the adjacent glow plug), cleaning the chips with compressed air; after drilling, perform the threading to screw in the extractor and complete the operation.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove a Broken Glow Plug from its Seat
How to Remove a Broken Glow Plug from its Seat
(Various brands) Various This guide shows how to remove a broken glow plug from its seat in the engine. To perform this operation, a specific kit is required. First, remove t…
How to Check the Functioning of the Glow Plugs
How to Check the Functioning of the Glow Plugs
(Various brands) Various There are several ways to check the proper functioning of the glow plugs, some a bit empirical but certainly effective, and others more systematic an…
How to Repair a Broken Antenna
How to Repair a Broken Antenna
(Various brands) Various In this video, you will learn how to repair the antenna of your vehicle if it has broken off on the roof. The piece may be stuck inside: what should …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos