Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Gear Knob of a Car

Model: (Various brands) Various
Part: Shift knob

In this video tutorial, you will learn how to remove and replace the gear knob of a car. First, remove the top part of the knob: remove the gear gaiter by prising it with something thin, then pull it upwards; usually, the gear knob is held by a clip that you will need to cut. Then pull the gear knob off the car. If it does not come off, extract the entire metal rod, then place it in a vice and use a puller or a hammer to extract the knob, as shown in the video.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Remove the gear knob from your car? Here's how to do it. Use a screwdriver to remove the plastic ring under the knob, then detach it from the rod. Re…
(Various brands) Various Replace the gear knob of the car. Remove it if damaged or if you want to replace it with another. Use a plastic lever to disconnect the leather gaite…
(Various brands) Various How do you replace the car gear knob? Here’s how to remove the gear knob and install the new one. Grip the knob and rotate it left and right until it…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos