Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to remove and replace the drive shaft boot from the wheel side in your car

Model: (Various brands) Various
Part: Drive shaft boot

This video will teach you a quick and easy way to disassemble, remove and replace the wheel-side drive shaft boot in your car. In this case, it is a Fiat 500, but the procedure can also be followed for many other car brands and models. First of all, you need to remove the old cap and carefully clean the area from any traces of residue. Once this is done, it will be possible to assemble and mount the new cap, using the glue and two metal rings. Thanks to this method, in less than ten minutes, you will have replaced the drive shaft boot on the wheel side in your car!


Posted on 28 December 2023 by ScegliAuto



How to remove and replace the drive shaft boot in your car (wheel side)
(Various brands) Various This video will show you how to remove and replace the old drive shaft boot in your car (wheel side), regardless of the make and model of the car. Af
How to replace a drive shaft
(Various brands) Various To carry out this operation easily, it will obviously be necessary to remove the wheel in question in order to have enough space for the following op
How a drive shaft is made
(Various brands) Various In a motor vehicle, the drive shaft is basically a shaft that transmits motion from the differential, or gearbox, to the hub of each wheel. And if th

Other guides that may interest you

How to set the time of the new Vespa 2023

In our new mini guide dedicated to your new Vespa 2023, we'll find out how to manually change the time displayed on the central console display. So first place your Vespa on the stand. Then insert the key and start the instrument cluster. At this point locate the "Mode" button on the right knob and hold it down for a few seconds. Release it as soon as the time on the panel starts flashing and press it several times to change both the hours and minutes digits. At the end, turn off the ignition and you are done.

Watch the video!


by ScegliAuto

More videos