Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Mirror (Passenger Side) in Your Car

Model: (Various brands) Various

This short video will show you how to remove the old side mirror from your car and replace it with a new one. In this case, it is the right mirror (passenger side), but the procedure is identical for both side mirrors of your car. First, using the appropriate removal tool, detach the plastic cover plate located inside the door by the mirror. Once done, unscrew the screws securing the mirror, disconnect it from the window motor, and finally remove it. Following the same procedure in reverse, you will easily mount a new side mirror successfully!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Properly Adjust the Exterior Mirrors
How to Properly Adjust the Exterior Mirrors
(Various brands) Various In this video, we see that the traditional method of simply viewing the side of your car in the mirror creates a blind spot. Instead, let's look at t…
How to Turn On the Lighting Devices in Your Car
How to Turn On the Lighting Devices in Your Car
(Various brands) Various (2004-2012 / ) In this video tutorial, you can see how to turn on the lighting devices in your car. First, get into your vehicle and sit in the passenger seat; inse…
Replacing Door Mirror
Replacing Door Mirror
(Various brands) Various Let's look at the removal and replacement of the mirror on your car. Remove the internal trim part of the mirror (there are plastic clips), unscrew t…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos