Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Car Windscreen

Model: (Various brands) Various
Part: Windshield

Video tutorial

Open the bonnet and insert the support rod. Unscrew the bolt that secures the wipers and remove them. Detach the trim around the glass using a plastic lever.

Remove the plastic covering near the windscreen from the outside by unscrewing the fixing bolts and leveraging with the same lever used earlier. Take off the rear-view mirror.

Thread about 1.5 metres of wire into a large needle and, from inside the cabin, insert it between the windscreen and the dashboard. Now, from the outside, pull the wire with pliers and insert it into the designated handle, as shown in the video.

Pass the wire all around the glass to detach it, then remove it.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Windshield Replacement for Your Car
Windshield Replacement for Your Car
(Various brands) Various In this video, learn how to remove the windshield from your car. First, open the bonnet and remove the plastic cover located under the windshield, th…
How to Replace the Windscreen
How to Replace the Windscreen
(Various brands) Various First, apply the complete seal to the new windscreen that has not yet been installed. Now, remove the external seal present on the windscreen install…
How to Remove the Toll Tag Holder from the Car Windscreen
How to Remove the Toll Tag Holder from the Car Windscreen
(Various brands) Various The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. Howeve…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos