Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the front bumper on Microcar 50 - Ligier - Aixam

Model: (Various brands) Ligier - Years 2013-2020
Part: Front bumper

In this video we will see the instructions to be able to remove the front bumper on a 50cc Microcar, such as on the Ligier or Aixam. First of all, let's remove the screws and the fixing clips that we find on the wheel arches, in order to unhook the front bumper from the mudguard; then we gently pry the sides to release the components, as shown in the video. At this point we unscrew the upper screws of the bumper and the lower ones, in order to remove it; now we can replace it, if necessary, with the new one, applying the reverse disassembly procedure!

Posted on 22 April 2021 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Ligier Js 50?
What is the fuse diagram for the Ligier Js 50?
(Various brands) Ligier .. The Ligier Js 50 microcar has several fuses inside, used to intervene in case of electrical overload. Each.. …
How do you reset the service light on the Ligier JS60?
How do you reset the service light on the Ligier JS60?
(Various brands) Ligier .. The Ligier JS60, the microcar featured in this video, is linked to a maintenance program related to changing.. …
How to remove the steering wheel from a Ligier JS60 (because there is no airbag)
How to remove the steering wheel from a Ligier JS60 (because there is no airbag)
(Various brands) Ligier .. to most microcars in this category, including Aixam, Microcar, etc.; this is because they are classified as quadricycles, not as cars, and therefore.. …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos