Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bumper Bulb on Piaggio Porter

Model: (Various brands) Various
Part: Front bumper

Video tutorial

Unscrew the screws accessible only by opening the front doors, as clearly shown in the video. First, unscrew the two middle screws, then the lower ones.

At this point, unscrew the bolts located at the front of the bumper, first those at mid-height, then those securing the bumper from underneath. Done! Now you can manually remove the bumper, working slowly and being careful not to damage any part.

Once the bumper is free, you can open the headlamp by unscrewing the fixing bolt and finally replace the bulb. Reassemble everything.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to dismantle the front door lock mechanism of the Piaggio Porter
How to dismantle the front door lock mechanism of the Piaggio Porter
(Various brands) Various To remove the front door of the Piaggio Porter, as shown in the video, you need to remove the door lock clip by unscrewing the cap. Next, remove the …
How to Change the Oil in a Piaggio Porter
How to Change the Oil in a Piaggio Porter
(Various brands) Various To change the engine oil in a Piaggio Porter, lift the vehicle for easier access. Next, position a fluid collection tray under the oil drain plug. On…
How to Replace the Rear Brake Shoes of a Piaggio Porter
How to Replace the Rear Brake Shoes of a Piaggio Porter
(Various brands) Various Before starting, lift the rear of your Piaggio Porter. Begin by removing the rear wheel by unscrewing the fastening bolts. Next, unscrew and remove t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos