Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : Disassembly and cleaning of the throttle body on the 1.9 CDTI - JTD engine on Fiat and Opel

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Throttle body
Operation: Disassembly and cleaning of the throttle body on the 1.9 CDTI - JTD engine on Fiat and Opel

In this simple guide we will see the steps to disassemble and clean the throttle body on the 1.9 CDTI and 1.9 JTD engine mounted on Opel and Fiat, but also on Alfa Romeo and Lancia. First of all we open the engine hood and begin to disassemble the throttle body, which we find on the right of the engine compartment; to do this we remove the suction sleeve, unscrewing the screws of the clamp, and then unscrew the screws of the aluminum curve, in order to remove it. At this point we disconnect the accelerator cable to remove the throttle body; clean with a special degreaser and reassemble everything!


Posted on 25 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vari - Where is the throttle body located? Read Answer
    • Vari - Why does the F1 error light come on in the Suzuki Burgman? Read Answer
    • Vari - Where is the throttle body located? Read Answer
    • Vari - How is the throttle body removed? Read Answer
    • Vari - How much does it cost to clean the throttle body? Read Answer
    • Vari - Where is the throttle body located? Read Answer
    • Vari - Under what circumstances does the yellow light with the padlock turn on? Read Answer
    • Vari - How many km does the suction duct need to be cleaned? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos