Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Various
  6. : How to clean the throttle body.

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Throttle body
Operation: How to clean the throttle body.

In this video, we see how to thoroughly clean the throttle body, the main culprit of a problem that can afflict a car, namely jerking. It is a problem that can occur especially when starting and with unstable minimum. The first thing to do is definitely to check the spark plugs first and then the spark plug wires. If there are no problems with these two components, then the throttle body must be checked. The problem is that the real dirt cannot be seen unless the part is completely disassembled. Here it is cleaned with thinner and a brush (taking care not to touch the plastic parts). Then a pass on the external parts with a very fine sandpaper. After the component has been cleaned, we see the slots where the air passes. It is essential that these slots remain clean, because they are exactly what, when obstructed, causes the engine to gurgle and jerk, especially for cars that run on gas (LPG and methane).


Posted on 30 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - Where is the throttle body located? Read Answer
    • Vari - Why does the F1 error light come on in the Suzuki Burgman? Read Answer
    • Vari - Where is the throttle body located? Read Answer
    • Vari - How is the throttle body removed? Read Answer
    • Vari - How much does it cost to clean the throttle body? Read Answer
    • Vari - Where is the throttle body located? Read Answer
    • Vari - Under what circumstances does the yellow light with the padlock turn on? Read Answer
    • Vari - How many km does the suction duct need to be cleaned? Read Answer

How to set the time in the Renault Twingo?

As we can see in this tutorial, setting the time in the Renault Twingo 2 is an extremely simple and fast operation. We start by turning on the instrument panel, it is not necessary to start the engine, after which we hold down the indicated button, located at the extreme right of the dashboard. As soon as the time starts flashing, let's set it with a quick press of the same button. To move on to setting the minutes, let's avoid pressing it for a couple of seconds. Once the operation is finished, we wait once again for the 2 seconds in order to return to the main screen.

Watch the video!


by ScegliAuto

More videos