Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Alternator

Model: (Various brands) Various
Part: Alternator

Let's look at dismantling the alternator of the car. Lift the front bonnet and disconnect the battery terminals, then raise the vehicle with a jack to the desired height. Remove the cover from under the engine bay. Use a socket wrench to unscrew the securing bolts of the alternator, remove the belt and take it out of the engine bay. Install the new alternator, connecting the power cables and the associated securing screws. Fix the cover panel under the engine bay, then reconnect the battery terminals. Test the operation of the alternator.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Car Starter Motor
Removing the Car Starter Motor
(Various brands) Various Is the starter motor on your car showing no signs of operation? Here's how to remove it from the engine bay. Disconnect the starter motor power termi…
Replacing the Starter Motor
Replacing the Starter Motor
(Various brands) Various Want to replace the starter motor in your car? Here’s how to remove the damaged part from the engine bay. Lift the front bonnet to access the starter…
Removing the Starter Motor from a Scooter
Removing the Starter Motor from a Scooter
(Various brands) Various In this tutorial video, you will learn how to remove and replace the starter motor in a generic scooter; the procedure may vary from scooter to scoot…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos