Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Tachograph Clock?

Model: (Various brands) Various
Part: Clock

To set the tachograph clock, press and hold the down arrow until "Vehicle Entry" appears. Confirm the selection by pressing the OK button and scroll down again with the arrow until "Local Time" appears. A screen will then appear where you can adjust the local time, changing it by a quarter of an hour using the appropriate arrows. Once the time is confirmed, press the OK button. Additionally, the UTC time within the tachograph cannot be changed.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the tachograph?
How to set the clock on the tachograph?
(Various brands) Various To set the clock on the tachograph, press the OK button located on the right side of the tachograph. Then scroll down using the appropriate arrow unt…
How to Change the Time on a Siemens VDO Digital Tachograph
How to Change the Time on a Siemens VDO Digital Tachograph
(Various brands) Various The process for changing the time on a Siemens VDO digital tachograph may vary slightly depending on the model and version of the tachograph. However…
How to set the time on the tachograph UTC
How to set the time on the tachograph UTC
(Various brands) Various Today we will see how to adjust the time on the UTC tachograph of a vehicle by storing the local time. To perform this simple operation independently…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos