Do it yourself
Frequently asked questions about cars and motorcycles

Useful Tips for Cars with and without Start&Stop

Model: (Various brands) Various
Part: Battery

In this video tutorial, you can see the substantial differences between cars with Start&Stop systems and those without. The first tip is to perform regular checks on the battery. For those who use the vehicle infrequently, it is advisable to drive the car at least once a week to prevent the battery from losing charge, as modern cars drain the battery more easily due to the large amount of electronics present in vehicles, which can cause the battery to fail sooner than expected. The best times to perform checks are before summer and before winter, as batteries are under more stress during these seasons. If the car is equipped with Start&Stop, you must replace the battery with a specific type such as the EFB, which supports more charge and discharge cycles than standard batteries.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various The start-stop system allows the engine to shut off when stopped at traffic lights or in traffic, aiming to reduce fuel consumption. To restart the e…
(Various brands) Various European pollution regulations have allowed the optional and then mandatory addition of various anti-pollution systems such as AdBlue, START&STOP, DP…
(Various brands) Various If our car is equipped with the start & stop system, and we need to change the battery, we must make a careful choice regarding the purchase of a new…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos