Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Motorcycle Battery

Model: (Various brands) Various
Part: Onboard computer

If you have tried to start your motorcycle but it does not respond, the first suspect is the battery, which suffers in low temperatures, especially with frequent starts over short distances. The focus of this guide is a battery, "The UNIBAT from the new CX series". It is an AGM technology battery that is ready to use, meaning it does not need to be filled with electrolyte before installation, and it is 100% sealed, offering 30% more cranking power compared to traditional AGM batteries. Moreover, being sealed, it requires no maintenance. To remove the old battery, first disconnect the black negative cable, followed by the red positive cable. Then secure the new battery to the motorcycle.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Scooter Battery and Motorcycle Spark Plug
How to Replace the Scooter Battery and Motorcycle Spark Plug
(Various brands) Various In this video tutorial, see how to replace the scooter battery and the motorcycle spark plug. To replace the scooter battery, obtain a suitable batte…
How to Change the Battery on a Yamaha Xmax 300
How to Change the Battery on a Yamaha Xmax 300
(Various brands) Various If you need to replace the battery on the motorcycle, follow the instructions below: first, remove the front fairing by unscrewing the fixing support…
How to Replace the Battery of a Yamaha R6?
(Various brands) Various This tutorial video shows how to replace the battery of a Yamaha R6 motorcycle. The first step is to gather the necessary tools, including an Allen k…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos