Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Piaggio Liberty

Model: (Various brands) Various
Part: Starter motor

Video tutorial

If you need to replace the starter motor on your scooter, follow the instructions outlined below and refer to the images in the video. To access the area where the starter motor is located, you must first remove the lower mounting bolt of the rear shock absorber to lower the wheel and gain access to the upper part of the engine where the starter motor is situated.

Next, unscrew the support bolts of the starter motor, allowing you to pull it out of its housing.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on the Piaggio Liberty 125
How to Replace the Spark Plug on the Piaggio Liberty 125
(Various brands) Various In this video, you will learn how to replace the spark plug on the Piaggio Liberty 125. Open the seat and then remove the storage bucket underneath. …
How to Replace the Battery on a Piaggio Liberty 150
How to Replace the Battery on a Piaggio Liberty 150
(Various brands) Various This video illustrates how to replace the battery on a Piaggio Liberty 150. First, ensure the motorcycle is turned off and open the seat compartment.…
How to Replace the Clock Battery on Piaggio Liberty 125
How to Replace the Clock Battery on Piaggio Liberty 125
(Various brands) Various In this video tutorial, you will see how to replace the clock battery on the Piaggio Liberty 125 4-stroke by following a few simple steps that will h…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos