Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Engine on a Vespa Px

Model: (Various brands) Various
Part: Engine

To dismantle the engine on this motorcycle model, follow the instructions provided below. First, tilt the vehicle onto its right side and disconnect the clutch, gearbox, and brake cables. Unscrew the screws from the gear selector controls to remove its pin. Next, remove the kickstart lever. Then, unscrew the mounting pin of the shock absorber to access the engine block mounting bolts.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, you will learn how to remove the front wheel of a Vespa. First, position the Vespa in a way that allows you to comfortably remove the …
(Various brands) Various In this model, you will learn how to charge the battery of the Vespa 300 GTS. Before charging the battery, insert the key and try to start the engine…
(Various brands) Various To dismantle the TM Racing KZ R1 engine, first remove the engine from its housing by unscrewing the bolts that secure it to the mounts and disconnect…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos