Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to reset the service on the Ducati Multistrada 1200

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Instrument cluster
Operation: How to reset the service on the Ducati Multistrada 1200

After replacing the engine oil on this model of motorcycle, we must then proceed to reset the service warning light which is on on the panel, to do this we can find the necessary information below and we can also refer to to the video. To proceed we need to use a diagnostic software and then connect the PC to the ODBII socket. Then select the motorcycle model and wait for the response from the control unit and the data transfer. Then select the list of errors and proceed to delete the service signal that was lit on the panel.


Posted on 7 July 2022 by ScegliAuto

    Frequently Asked Questions

    • Vari - Why did the speedometer stop working? Read Answer
    • Vari - Why doesn't the EDC light turn on? Read Answer
    • Vari - What does the yellow light with a padlock on one's car indicate? Read Answer
    • Vari - What does the red key light on the scooter indicate? Read Answer
    • Vari - What does the red warning light with the wrench symbol mean? Read Answer
    • Vari - What does EPS mean on a car dashboard? Read Answer
    • Vari - What does the warning light with a triangle and an exclamation mark inside mean? Read Answer
    • Vari - How do you turn off the warning light on the Majesty 400? Read Answer
    • Vari - Why is the Mercedes start-stop not working? Read Answer
    • Vari - What to do to reset the engine malfunction light? Read Answer
    • Vari - What does the oil light on the Suzuki GSXR 600 indicate? Read Answer
    • Vari - What does error code 59 indicate on the 2017 Chevrolet Sonic? Read Answer
    • Vari - What does the red warning light with a triangle and a car mean? Read Answer
    • Vari - What are the three main categories of warning lights on the instrument panel? Read Answer
    • Vari - Why does the ESC light turn on in cars? Read Answer
    • Vari - Why is the engine light on the scooter flashing? Read Answer
    • Vari - Why is the Mercedes TPMS not working? Read Answer
    • Vari - What problems does the EPC warning light give? Read Answer
    • Vari - What is the meaning of car error codes? Read Answer
    • Vari - What does the red airbag warning light in the car indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos