Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Car Exhaust Manifold

Model: (Various brands) Various - Years 1999-2005
Part: Engine

The exhaust manifold is the part that connects the car engine to the exhaust system. Its main function is to collect the gases produced by the combustion of fuel. The following guide shows how to proceed with changing the exhaust manifold; it is not a particularly complicated task and can be done by yourself. The exhaust manifold is connected to the exhaust system via clamps and bolts. Once removed, you can slide out the exhaust system, allowing you to take out the manifold and the gaskets, which will need to be replaced due to wear. You can then fit the new manifold, replacing all the old gaskets.

Updated on 12 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change Engine Oil on GY6 49cc-150cc (Chinese Scooter)
How to Change Engine Oil on GY6 49cc-150cc (Chinese Scooter)
(Various brands) Various Today, you will learn the steps to change the engine oil while performing the regular maintenance service on a GY6 49cc-150cc scooter (Chinese scoote…
How do you disassemble the Derbi D50B0 engine?
How do you disassemble the Derbi D50B0 engine?
(Various brands) Various To disassemble the Derbi D50B0 engine, you must loosen the screws that fix it to its housing in the center of the frame: once these screws have been …
How to Remove the Rear Wheel of an Italjet Torpedo 50 4t
How to Remove the Rear Wheel of an Italjet Torpedo 50 4t
(Various brands) Various To replace the rear wheel of the Italjet Torpedo 50 4t, use a screwdriver to remove the protective cap; then, using pliers, pull out the split pin an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos