Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Temperature Sensor on a Car

Model: (Various brands) Various

If you are experiencing issues with the external temperature sensor in your car, such as excessively low or high temperatures, you need to replace it. To do this, refer to the instructions provided in this description and use the images from the video as a guide. The internal temperature sensor is located just behind the radiator grille and in front of it. To remove it, you must lift the vehicle and disconnect the electrical connector from underneath the engine bay, then use a sharp object to pry it out and extract the sensor.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How the Temperature Sensor Circuit Works
How the Temperature Sensor Circuit Works
(Various brands) Various Let's see how the temperature sensor circuit works: electrical energy is supplied by the battery; the ignition key acts as a switch, while the fuse i…
How to Replace the Internal Temperature Sensor?
How to Replace the Internal Temperature Sensor?
(Various brands) Various To replace the sensor that measures the internal temperature of the car, use a lever tool to remove the plastic cover located at the bottom right of …
How to Check the Temperature Sensor Functionality
How to Check the Temperature Sensor Functionality
(Various brands) Various To check if the coolant temperature sensor (commonly known as the bulb) is functioning correctly, proceed as follows: connect the multimeter probes t…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos