Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Internal Temperature Sensor?

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

To replace the sensor that measures the internal temperature of the car, use a lever tool to remove the plastic cover located at the bottom right of the steering wheel. The sensor will be fitted inside the cover and connected to a connector.

By removing the sensor from its housing and disconnecting the connector, the part can be replaced. The new sensor should then be positioned back in its place and connected to the connector.

Finally, reinstall the plastic cover.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Check the Temperature Sensor Functionality
How to Check the Temperature Sensor Functionality
(Various brands) Various To check if the coolant temperature sensor (commonly known as the bulb) is functioning correctly, proceed as follows: connect the multimeter probes t…
How to Replace an Oxygen Sensor in Your Car
How to Replace an Oxygen Sensor in Your Car
(Various brands) Various In this video tutorial, see how to replace an oxygen sensor in your car by following some simple steps: first, lift the car using a hydraulic jack an…
How to Test the Temperature Sensor with a Multimeter
How to Test the Temperature Sensor with a Multimeter
(Various brands) Various The engine coolant temperature sensor (ECT) monitors the engine temperature and sends the data to the ECU, which uses it to manage injection, timing,…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos