Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to reset the oil warning light on a Honda SH 125

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: -board computer
Operation: How to reset the oil warning light on a Honda SH 125

This video also shows how to change the oil in addition to resetting the warning light for a Honda SH 125 scooter. As demonstrated, just empty the oil pan by unscrewing the locking bolt and placing a basin where to pour the used oil. . Re-tighten the bolt to close the oil pan once the oil has run out. Reinsert the new oil and screw the cap back on. Now just press the button at the bottom right of the odometer for about ten seconds and then turn the key to turn on the ignition and the "Oil Change" light will be off.


Posted on 5 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Vari - What does the CTBA light on the Honda indicate? Read Answer
    • Vari - How do you deactivate the immobilizer in a Fiat? Read Answer
    • Vari - What to do when the Bluetooth in the Volkswagen is not working? Read Answer
    • Vari - How to reset error codes on Harley Davidson? Read Answer
    • Vari - Why isn't the smart navigation working in the car? Read Answer
    • Vari - What does the wrench symbol on the Chevy car dashboard mean? Read Answer
    • Vari - Why does the wrench symbol light up on the Peugeot? Read Answer
    • Vari - Why is the touch screen of the Renault not working anymore? Read Answer
    • Vari - What does it mean if the particulate filter warning light comes on in a Volkswagen? Read Answer
    • Vari - Why isn't the front assist of my car working? Read Answer
    • Vari - Why is the car's infotainment system not working? Read Answer
    • Vari - Why doesn't the car's light turn off? Read Answer
    • Vari - Why does Volkswagen have problems with the infotainment system? Read Answer
    • Vari - What to do if Sync on Ford does not work? Read Answer
    • Vari - What does the acronym Tc light in Car mean? Read Answer
    • Vari - What to do if the pre-safe warning light suddenly comes on in the Mercedez Benz? Read Answer
    • Vari - What causes the problems with the capture rear view camera? Read Answer
    • Vari - How to recognize the meaning of the symbols of the Renault warning lights? Read Answer
    • Vari - What is the definition of error code 003 in Renault and Dacia? Read Answer
    • Vari - What to do when the message System blocked contact a representative appears on the Renault? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos