Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to reset car ECU errors with OBD2 device from Android

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Control unit
Operation: How to reset car ECU errors with OBD2 device from Android

In this video tutorial you can see how it is possible to reset the errors of the car ECU with the ELM 327 - OBD2 device from Android, a procedure that can also be done by non-professionals in the sector. First you have to get into your car, insert the key and turn on the instrument panel; you see that the central locking error light is on; at this point you need to reset it: you need an OBD2 device and a Smartphone with an Android system. Typically the OBD2 device is located inside the fuse box. Now take your phone and from the WIFI section you have to detect the OBD2 device and connect it to the phone. Now you have to go to the Play store and download the application (OBD2) that is used to diagnose your car. Once you have downloaded the application you have to start it with the WIFI active; now you have to go to settings and go to read and reset the error. Once you have the code you can RESET.


Posted on 25 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Vari - Where is the central locking unit located on Ford cars? Read Answer
    • Vari - Where is the radiator fan fuse located? Read Answer
    • Vari - Why does the dashboard of the Mini Cooper light up but the car doesn't start? Read Answer
    • Vari - How much does it cost to change the ECU? Read Answer
    • Vari - How much does it cost to replace the ECU on a car? Read Answer
    • Vari - How much does it cost to replace the BCM ECU? Read Answer
    • Vari - How do you replace the xenon control unit of a Mercedes? Read Answer
    • Vari - What does the ffc fault code on the Iveco mean? Read Answer
    • Vari - Where is the Freemont oil pressure sensor located? Read Answer
    • Vari - What to do if the Camper's 12V power supply doesn't work? Read Answer
    • Vari - How much does it cost to replace the BSI ECU on a Peugeot? Read Answer
    • Vari - How much does it cost to reprogram the bsi? Read Answer
    • Vari - Where is the central locking control unit located? Read Answer
    • Vari - Where is the automatic transmission control unit located? Read Answer
    • Vari - What does IBC error mean? Read Answer
    • Vari - How much does the repair of the Opel Corsa ABS control unit cost? Read Answer
    • Vari - Where is the Fiat Grande Punto horn relay located? Read Answer
    • Vari - How to reset the control unit? Read Answer
    • Vari - How to program the engine control unit? Read Answer
    • Vari - What to do if the start & stop does not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos