Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Recharge Your Car's Air Conditioning Yourself

Model: (Various brands) Various
Part: Air conditioning

To save a fair amount of money by recharging the air conditioning, purchase the kit from easyklima.com (there are recharges for all vehicles). You will receive a complete kit with the hose, nozzles, pressure gauge, and the canister for the recharge, allowing you to do it all yourself, with comprehensive instructions. The cost is approximately £30. You can also buy a canister that seals leaks if desired. Open the bonnet, remove the air filter, and the air conditioning recharge cap. (This operation should be done with the engine running and the air conditioning on). Connect the canister to its inlet nozzle and start the procedure. The canister must be held upside down for 5 to 10 minutes, checking the pressure gauge. Job done.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Car Air Conditioning with a £7 Canister
How to Top Up the Car Air Conditioning with a £7 Canister
(Various brands) Various In this video tutorial, you will see how to top up the car's air conditioning with a £7 canister (available in 200g and 350g formats). This system ca…
How to determine exactly when the car air conditioner needs to be recharged
How to determine exactly when the car air conditioner needs to be recharged
(Various brands) Various In this video, we will see how to determine exactly when to recharge the car's air conditioner, without relying solely on personal feelings, but on f…
How to Recharge Your Car's Air Conditioning at Home
How to Recharge Your Car's Air Conditioning at Home
(Various brands) Various In this video, we will see how to recharge the air conditioning gas in your car by yourself. First, you need to obtain the kit, which can be found on…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos