Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Tyre Pressure Monitoring Device

Model: (Various brands) Various
Part: Tires

In this video, you will learn how to install a tyre pressure monitoring device. Once you have purchased the control unit for measuring tyre pressure, open the box and examine the contents. Inside, you will find four sensors (with batteries) that need to be installed on the respective wheels as indicated on each sensor, along with the control unit equipped with a display and reader. Each sensor must be screwed onto the valve of each wheel to detect the pressure. To activate the control unit, simply press and hold the power switch for a few seconds. Once activated, you will find both the temperature and pressure of each tyre displayed.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How are the tire pressure sensors of a car programmed?
How are the tire pressure sensors of a car programmed?
(Various brands) Various Generally, tire pressure sensors, when talking about recently built cars, are integrated, in terms of their control and programming, into the central…
Tyre Check and Resetting the Tyre Pressure Warning Light
Tyre Check and Resetting the Tyre Pressure Warning Light
(Various brands) Various The video shows how to perform a DIY tyre check and reset the tyre pressure warning light. This operation is necessary when one or more tyres have a …
How to adjust tire pressure
How to adjust tire pressure
(Various brands) Various Today we will explain how to adjust the tire pressure of your vehicle. Tire pressure should be checked at least once every three months, especially i…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos