Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to change oil and engine oil filter on Fiat 500

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Oil filter
Operation: How to change oil and engine oil filter on Fiat 500

The video shows us how to change the oil and relative filter on a 2015 Fiat 500 car. First of all, to work comfortably, it is necessary to lift the car off the ground, making sure that it remains in a stable position, inserting two jack stands on both sides, so it's best not to rely solely on the jack. To proceed we first need to remove the engine cover on the bottom of the car, and we can do this by unscrewing the appropriate bolts with a 10mm spanner, there should be about six. We will then proceed to drain the oil, positioning a bucket in which to drop it. To proceed with the replacement of the filter, we will have to open the hood; the video shows us where the oil filter that we are going to replace is located; to unscrew it we will need a 27mm socket wrench. Once the worn filter has been extracted, we will replace it with the new one, paying particular attention to the integrity of the gasket, a fundamental element for sealing and therefore avoiding oil leaks. Now it will be necessary to install the new filter in the appropriate housing and restart it with the same socket wrench used previously. Subsequently we are shown the oil pump filling phase, we are recommended API 5w30 certified oil, Kirkland sae full sintetich. The oil should be poured by inserting a funnel into the appropriate seat, 4 liters for this car model should be fine. After that, just close the cap and wait for the oil to go down into the sump. We will be able to check the level with the appropriate dipstick, it should be emphasized that the same must never exceed the maximum level, it must remain at an average level. Finally, by turning on the ignition of the car, we will be able to verify the restoration of the oil light.


Posted on 2 December 2022 by ScegliAuto



How to change Grand Voyager engine oil
(Various brands) Various Let's see how to replace the Chrysler Grnd Voyager oil and filter. We lift the vehicle with a special jack, remove the lower engine cover and locate
How to change the oil of the Fiat Premier
(Various brands) Various Despite its years, the Fiat Premier is still today one of the most characteristic and loved cars of its era. To ensure its maximum efficiency it is i
Replacement of the gearbox oil of a Fiat MultiJet
(Various brands) Various In this video we can see how to change the gearbox oil of a Fiat with a MultiJet engine: the vehicle in question had already covered over 150,000 kil

Other guides that may interest you

    Frequently Asked Questions

    • Vari - Where is the oil filter located on the Peugeot Satelis 125i? Read Answer
    • Vari - Where is the engine oil filter located? Read Answer
    • Vari - What is the location of the oil filter on the Yamaha Yfz 450? Read Answer
    • Vari - How much does it cost to replace the oil filter on cars with a 1.3 MultiJet engine? Read Answer
    • Vari - How many km do you replace the oil filter on the Honda X-Adv? Read Answer
    • Vari - Why is the oil filter blocked? Read Answer
    • Vari - Where is the oil filter located? Read Answer
    • Vari - Where is the Benelli TRK 251 engine oil filter located? Read Answer
    • Vari - Where is the Ford Ranger 3.2 cc oil filter located? Read Answer
    • Vari - Where is the engine oil filter located in a Ford Ranger? Read Answer
    • Vari - Every how many km it is necessary to change the oil filter Read Answer
    • Vari - Where is the oil filter cartridge located on the MultiJet engine? Read Answer
    • Vari - Where is the oil filter generally located? Read Answer
    • Vari - Where is the oil filter located? Read Answer

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos