Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the TPMS Valve and Reset the Dashboard Warning Light?

Model: (Various brands) Various
Part: Tire pressure warning light

In this video, we will show you how to replace the TPMS valve and reset the dashboard warning light. Insert the diagnostic device into the OBD port and turn on the ignition. Access the self-diagnosis resources of the TPMS control unit as shown in the video. Select the vehicle manufacturer and hold for more than two seconds. Select the tyre pressure function and enter the TPMS system diagnosis. To check the status of the sensors, select 'aftermarket sensor management'. Bring the AXONE TPMS sensor close to the valve of the tyre indicated by the warning light to verify the correct functioning of the sensor. If the system reveals an anomaly in the sensor's operation, proceed to replace it as shown in the video.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to repair the TPMS valve stem
How to repair the TPMS valve stem
(Various brands) Various In this video we can see how to repair the stems of TPMS valves, when the aluminum they are made of has corroded, without having to remove the tire o…
What does the TPMS warning light indicate?
What does the TPMS warning light indicate?
(Various brands) Various The TPMS light is the light that communicates that the tire pressure on a specific vehicle needs to be checked and adjusted. To adjust the tire press…
How is a tire sensor made and where is it installed?
How is a tire sensor made and where is it installed?
(Various brands) Various If we don't know how a tire sensor (TPMS) is made and where it is installed, this video shows us. What we see is indeed a direct TPMS, the most commo…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos