Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the TPMS Valve Stem

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

In this video, you can see how to repair TPMS valve stems when the aluminium they are made of has corroded, without having to remove the tyre or wheel. This can be done in a few minutes and does not require reprogramming or relearning of the sensor.

However, this is not about repairing a broken or flat TPMS sensor, but simply replacing the top part, where air enters the tyre. If the sensor is flat, it cannot be repaired or recharged and must be replaced; however, often it is the top part that breaks, preventing air from filling the tyre because the air hose does not connect to it and does not push on the valve stem, allowing air to enter.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to Replace the TPMS Valve and Reset the Dashboard Warning Light?
How to Replace the TPMS Valve and Reset the Dashboard Warning Light?
(Various brands) Various In this video, we will show you how to replace the TPMS valve and reset the dashboard warning light. Insert the diagnostic device into the OBD port a…
How to Inflate Car Tyres
How to Inflate Car Tyres
(Various brands) Various In today's video, learn how to check the pressure and inflate a tyre on your vehicle. Start by obtaining a compressor with a pressure gauge. Remove t…
How to disassemble and reassemble VDO TG1D tire pressure sensors
How to disassemble and reassemble VDO TG1D tire pressure sensors
(Various brands) Various In this video we can see how to disassemble and reassemble the VDO TG1D tire pressure sensors: we need to press and hold the sensor clip with a suita…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos