Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why It Is Important to Replace Brake Fluid in a Vehicle

Model: (Various brands) Various
Part: Brake fluid

Through this video tutorial, you will understand why it is important to replace brake fluid in a vehicle, specifically in a motorcycle: you should frequently change the brake fluid and also monitor the brake fluid level, as it is hygroscopic. Being hygroscopic, it absorbs moisture, and as the temperature increases, air bubbles can form, compromising braking quality. The procedure is simple: start by draining and cleaning the brake fluid reservoir, then replace it with new fluid (you can use RBF 700 fluid as it is high-performance and has a higher boiling point). Dispose of the old fluid carefully to avoid creating air bubbles (do the same for the hoses and brake calipers).

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Why You Should Periodically Change Brake Fluid
Why You Should Periodically Change Brake Fluid
(Various brands) Various This video explains why - and how - to change the brake fluid. We all know that brake fluid does not wear out unless there are leaks in the lines. So…
How to bleed the brake fluid
How to bleed the brake fluid
(Various brands) Various In this video we see how to bleed the brake fluid. We open the cover of the fluid reservoir above the pump: throughout the operation it is very impor…
How to Check Fluid Levels
How to Check Fluid Levels
(Various brands) Various Before embarking on a journey, it is advisable to check the levels of all the car fluids to top up if necessary. The first fluid to check is the oil.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos