Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Are Additional Control Units Plugged into the EOBD Socket Worth It?

Model: (Various brands) Various
Part: Checks and maintenance

Our YouTuber, a true tuning professional, tested one of those additional control units - which are currently very popular - costing around £80 to £100, plugged directly into the EOBD socket, promising more power and torque. Aware that remapping control units is a meticulous job involving technical work and testing on the vehicle, he was rightly surprised that a piece of plastic could perform the same function he did with specialised equipment. Indeed, he uncovered the scam. With or without the "additional control unit", the vehicle produced the same horsepower and torque, even after several consecutive tests.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate Fog Lights on the ECU
How to Activate Fog Lights on the ECU
(Various brands) Various Installing fog lights on a vehicle that didn't have them from the factory doesn't guarantee they will work. You must communicate the installation to …
How Do ECUs Work and How to Read Their Parameters
How Do ECUs Work and How to Read Their Parameters
(Various brands) Various Let’s see how to read the data from the ECUs: first, what does CAN-BUS mean? CAN stands for Controller Area Network, which is where the data from var…
Are All-Season Tyres Worth It?
Are All-Season Tyres Worth It?
(Various brands) Various In this video, we find a quick answer to the question of whether all-season tyres are worth it. If safety and performance are your priorities, the ad…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos