Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Kymco Agility

Model: (Various brands) Various
Part: Clock

If you need to change the time on the dashboard of this scooter, you will find the procedure to follow in the description below, and you can also find information in the video. First, turn on the ignition by turning the key in the ignition switch. Next, locate the two buttons on the dashboard and press them simultaneously, holding them until the hour value starts to flash. Then, press the right button to scroll through the hours; once the new value is set, press the left button to save it. Repeat the same procedure to change the minutes.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Suspension on a Kymco Agility 125
How to Replace the Rear Suspension on a Kymco Agility 125
(Various brands) Various This tutorial shows how to replace the rear suspension on a Kymco Agility 125 in a few simple steps. The suspension is difficult to reach from behind…
How to Set the Clock on the Kymco 300
How to Set the Clock on the Kymco 300
(Various brands) Various If you need to change the time on this scooter model, you will find simple instructions on how to proceed in the tutorial video and in the descriptio…
How to change the time on a Kymco Xciting 300
How to change the time on a Kymco Xciting 300
(Various brands) Various If you need to change the time set on the dashboard of your motorcycle, you will find the necessary instructions and steps in the description below, …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos