Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "V Belt" Light on the Yamaha Tmax?

Model: (Various brands) Various
Part: Warning light – error code

Video tutorial

The V Belt light indicates it's time for a service, including the replacement of the drive belt. Once the work is complete, proceed to reset the light.

Turn on the instrument panel of your scooter and press the left button below the instrument panel four times until you reach the trip meter. At this point, press and hold the same button for a short period.

The value on the trip meter will start to flash for a few seconds and then reset to zero. You can now release the button as you have reset both the V Belt light and the service light.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Yamaha Xmax 250
How to Reset the Oil Light on the Yamaha Xmax 250
(Various brands) Various Resetting the oil light on the 2007 Yamaha Xmax 250 is a very simple operation that you can carry out independently. It is important to reset the lig…
How to Reset the Oil Warning Light on the Yamaha X Max 300
How to Reset the Oil Warning Light on the Yamaha X Max 300
(Various brands) Various To reset the oil warning light on the Yamaha X Max 300, follow these steps: Turn off the ignition of the X Max, press and hold the mode and set butto…
Replacing the Drive Belt on the Yamaha Tmax 530
Replacing the Drive Belt on the Yamaha Tmax 530
(Various brands) Various To replace the drive belt on this scooter, you must first remove the right side cover to access the transmission. Using a socket spanner, begin remov…

    Frequently Asked Questions

    • Vari - What does the yellow engine malfunction light on mean? Read answer
    • Vari - What does the Ligier battery light indicate? Read answer
    • Vari - What does the check engine light on the Sym scooter mean? Read answer
    • Vari - What does the "CL 0-7A" error mean in the Kymco Agility scooter? Read answer
    • Vari - Why did the orange engine failure light come on in the Ligier JS50? Read answer
    • Vari - What does the error code 46 mean in the Yamaha T-MAX 500 scooter? Read answer
    • Vari - What does the flashing red light on the Piaggio Beverly 300 instrument panel indicate? Read answer
    • Vari - What does it mean when the INSP light comes on on the dashboard of the car? Read answer
    • Vari - What does the flashing ABS light on the Piaggio Liberty 125 mean? Read answer
    • Vari - What does the Piaggio Beverly 300 engine warning light indicate? Read answer
    • Vari - What does the Benelli TRK 502 engine warning light mean? Read answer
    • Vari - When do the orange lights come on in cars? Read answer
    • Vari - What color is the airbag warning light? Read answer
    • Vari - What does the yellow triangle light with an exclamation mark mean? Read answer
    • Vari - What does the EDC light mean? Read answer
    • Vari - What does the "Met in" light on Kymco scooters mean? Read answer
    • Vari - What does the engine warning light on the Kymco Agility 125 mean? Read answer
    • Vari - What does the Sym Symphony 125 engine warning light mean? Read answer
    • Vari - What does the disA light mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos