Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Regenerate the Diesel Particulate Filter of a Car

Model: (Various brands) Various
Part: Diesel particulate filter

Regeneration of the diesel particulate filter activates automatically when the vehicle is used for 6 to 9 hours continuously or after driving 310 miles. This allows the appropriate temperature to be reached, and the control unit initiates the process. If automatic regeneration does not work, forced regeneration can be attempted. Forced regeneration occurs by increasing the engine revs to 3,000 for 10 to 12 minutes. Add a professional additive, and regeneration should start. Failure to perform regeneration risks engine damage and premature replacement of the filter.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Regenerate the DPF on a Diesel Vehicle
How to Manually Regenerate the DPF on a Diesel Vehicle
(Various brands) Various On any diesel vehicle, regardless of mileage, there is a manual method to perform a "manual" regeneration of the diesel particulate filter (DPF). You…
How to Clean the Diesel Particulate Filter with Warm Up Additive
How to Clean the Diesel Particulate Filter with Warm Up Additive
(Various brands) Various In this video tutorial, you can see how to clean the diesel particulate filter with Warm Up additive: if your car has covered over 62,000 miles, the …
How to Clean the Diesel Particulate Filter
How to Clean the Diesel Particulate Filter
(Various brands) Various If you want to clean the diesel particulate filter on your vehicle, you can follow the instructions provided in this video and the description below.…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Urea warning light on after when to refuel? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos