|
Do it yourself
| |||
| ||||
How to Reset All ECUs and Control Modules in Your Car
Model: (Various brands) Various
In this video, we will see how to reset all the control units in your vehicle; this method is valid for almost all cars in general and corrects most errors, including fuel adjustments, incorrect idle, and faulty sensor values. You will only need a jumper. Start by disconnecting the negative terminal from the battery, isolating it, and connecting the cables to the terminal you removed and the other to the positive terminal; leave it like this for a while until the positive circuits charge into the negative and ground out. After about 20 minutes, reconnect the negative terminal. Turn on the ignition and allow the ECU to learn the new values for about fifteen seconds. Then turn off for a moment and directly start the engine, leaving it running for five minutes so it can find its ideal idle. Then try to engage the gears (this is an automatic gearbox), and the gearbox will adapt to the values during use.
Updated on 28 August 2026 by ScegliAuto
Video tutorial
Related tutorials
(Various brands) Various
In this video, learn how to reset a vehicle's ECUs without the aid of a scanner. You will only need a key to disconnect the positive and negative ter…
(Various brands) Various
Let’s see how to read the data from the ECUs: first, what does CAN-BUS mean? CAN stands for Controller Area Network, which is where the data from var…
(Various brands) Various
Is the rear window of your car cracked? Let's see in this video how to proceed with the removal and replacement of the glass. To begin, remove the se…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Battery on a Honda Vision 110
To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.830
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |