Do it yourself
Frequently asked questions about cars and motorcycles

How to Avoid the Costly Duplicate Key Problem

Model: (Various brands) Various
Part: Key

To duplicate a key without the immobiliser function and save a lot of money, as getting a duplicate from the dealership costs around £150. Here’s how to do it: Have two copies of the key made at a hardware store. Then, take some self-locking ties and place the master key as close as possible to the ignition switch inside the plastic casing of the steering column (as shown in the video) and the key will work. The duplicate key lacks a microchip, does not have a code or immobiliser function, but it works. Additionally, you will have an emergency key always with the vehicle.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various A radiator that has taken hits, even if seemingly minor, can cause a series of issues: the radiator has fine aluminium fins between the tubes; stones…
(Various brands) Various This video is very generic, because it does not concern a specific brand, but it shows us in general how to replace the casing of a car remote. In re…
(Various brands) Various If you ignore the warnings your vehicle gives when the timing belt is about to break (the belt is hard, fraying, etc.) and it eventually breaks, it c…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos