Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this video, we see how to replace a wheel with the spare tire. Of course, in the car, we will have the jack, the lever to operate it, and the key to loosen the wheel bolts that we need to replace. Naturally, we will also have the yellow vest to wear when performing these operations around the vehicle, and the triangle to signal that there is a stopped car 50 meters away. The spare tire implies that we cannot exceed a maximum speed of 80 km/h and a maximum distance of 200 km. When performing the operation, always remember to engage the handbrake, then loosen the bolts and place the jack under the chassis. Raise the car so that the tire does not touch the ground, remove the punctured tire, and place the spare tire. Do an initial tightening of the bolts and then lower the vehicle. Finish tightening and start driving.
Posted on 16 December 2023 by ScegliAuto
How do you drive with the spare wheel?
(Various brands) Various Today when cars have a spare wheel it is not a normal wheel but a "spare wheel" and therefore the way to drive with the spare wheel is not that of a
How do you remove the spare wheel from the compartment where it is housed?
(Various brands) Various In campers, vans, and some types of cars, the spare tire is not located under the floor cover of the trunk, but rather beneath the vehicle and is hel
How do you change a tire?
(Various brands) Various In this video, we see how to change a tire, if necessary: the system is the same for all cars, except for a few differences in the location of variou Other guides that may interest you |
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |