Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the suspension bushings

Model: (Various brands) Various
Part: Suspension system

The failure of the suspension bushings on the wishbones is a common issue in many cars. Continuous stress and rubber aging lead to breakage, resulting in noise, especially when driving on rough surfaces. Instead of replacing the entire wishbone, you can replace just the bushings. Many manufacturers offer a range of repair kits that include only the bushes, but you will need the right tools to extract and insert them into their respective seats. This involves using sockets and threaded bars that act as extractors.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the maintenance program on an LPG-fueled vehicle?
What is the maintenance program on an LPG-fueled vehicle?
(Various brands) Various Usually on an LPG-fueled car, the maintenance program includes additional inspection and replacement phases which concern the additional components o…
How to replace the vehicle's tire pressure sensor
How to replace the vehicle's tire pressure sensor
(Various brands) Various Today we will explain how to independently replace the tire pressure sensor on the wheels of a vehicle. The sensors must be replaced when they stop w…
How to replace the rear bulb of the Tmax 500?
How to replace the rear bulb of the Tmax 500?
(Various brands) Various To replace the bulb in the rear light of the scooter, proceed as follows: first open and tip over the saddle and remove the fixing screws from the in…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos