Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Car Catalytic Converter

Model: (Various brands) Various
Part: Exhaust muffler

The catalytic converter functions to trap and reduce emissions of pollutants generated by fuel combustion. Although the engine management ECU already has a control strategy for monitoring filter clogging, implementing so-called regenerations, it often happens that due to unburnt diesel and oil leaks, the filter clogs to the point of putting the engine into recovery mode. Therefore, you should try to clean the catalytic converter of these residues, and an effective method is to remove the catalytic converter and heat it with a torch until the residues inside ignite.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Car's Catalytic Converter?
How to Clean the Car's Catalytic Converter?
(Various brands) Various To replace the car's catalytic converter, open the bonnet to access the components inside the engine bay. Specifically, you will need to remove the r…
How to clean a lambda sensor on a vehicle
How to clean a lambda sensor on a vehicle
(Various brands) Various Here’s how to clean the lambda sensor in an engine. The lambda sensor measures the percentage of oxygen in the exhaust gases, allowing for an assessm…
How to Keep the Catalytic Converter of a Petrol Car Clean
How to Keep the Catalytic Converter of a Petrol Car Clean
(Various brands) Various The function of the catalytic converter is to reduce emissions, but for it to work correctly, it must reach a certain temperature and be able to expe…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos