Do it yourself
Frequently asked questions about cars and motorcycles

How to Add Fluid to the Transmissions?

Model: (Various brands) Various
Part: Drivetrain

Video tutorial

After performing maintenance on your vehicle's transmissions, you need to add the appropriate fluid but don't know how? We have the solution. To add the fluid efficiently and quickly, make a hole in the cap of the bottle and another hole in the bottle itself.

Then, take a small plastic tube and the air compressor. Insert the tube into the bottle and once positioned under the transmissions, place the compressor over the hole in the bottle and press.

The air that forms inside the bottle will force the fluid out quickly.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

(Various brands) Various When the AdBlue system warning light comes on in a vehicle, it means you need to top up the fluid in the tank, usually after driving 2,500 miles. The…
(Various brands) Various Today, you will learn how to top up the windscreen washer fluid on any vehicle. It is important to know which fluid to use in the reservoir, whether …
(Various brands) Various Today we will explain how to add AdBlue liquid to the corresponding tank located inside the car. The tank is located next to the fuel tank, so before…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos