Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair a car remote control

Model: (Various brands) Various
Part: Key

In this video we see how to repair the remote control of a car. We must point out that it requires some knowledge of electronics and the ability to solder, so it is not something that everyone can do. Let's see how to do it: we open the remote control and take out the circuit board. We see that one of the electrical contacts corresponding to the buttons is damaged, so we will have to replace it and solder it back on. Then we place the new battery and put the circuit board back in the casing. We recharge the key spring, making it turn at least three times. We close the casing and test the functionality of the buttons. We close the casing from the side of the battery and the operation is complete.

Posted on 12 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Mercedes remote control
How to replace the battery of the Mercedes remote control
(Various brands) Various Today we will explain how to replace the battery of a Mercedes Benz car remote control on your own. To replace the battery, we need to press the butt…
How to repair a car key with a broken button
How to repair a car key with a broken button
(Various brands) Various In this video, we will see how to repair a remote control key with one of the buttons completely destroyed from use. If we do not want to change the …
How to program the Nice remote control
How to program the Nice remote control
(Various brands) Various Today we will explain how to program a gate remote control. To program a new Nice remote control, you need to use the "old" remote control. To carry …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos