Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Difference Between Various Types of Hybrid Cars

Model: (Various brands) Various

Video tutorial

In this video, see the difference between various types of hybrid cars: Mild Hybrids add a small hybrid battery to the internal combustion engine, assisting during overtaking and uphill driving, ultimately saving fuel; they never operate exclusively on electric power.

Full Hybrids combine an internal combustion engine with an electric motor: the battery charges through kinetic energy recovery, and the vehicle decides when to switch to electric mode, usually at low speeds.

Plug-in Hybrids can be charged from charging stations or domestic sockets. Here, you decide when to use electric power, and they have much longer ranges.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Brightness Comparison Between Three Types of Bulbs
Brightness Comparison Between Three Types of Bulbs
(Various brands) Various In this video tutorial, you can see how to replace halogen H7 bulbs with LED ones purchased from Amazon and Aliexpress, to observe the brightness dif…
What You Need to Know Before Replacing Start & Stop Batteries
What You Need to Know Before Replacing Start & Stop Batteries
(Various brands) Various In this video, you will see that batteries for vehicles with Start & Stop systems can be of two types: EFB or AGM, so check which type is installed i…
The Major Issue with 12V Batteries in Hybrid Cars
The Major Issue with 12V Batteries in Hybrid Cars
(Various brands) Various There is a known issue with 12V batteries in Toyota and Lexus hybrids: the batteries tend to fail prematurely (for example, in the Yaris Cross before…

    Frequently Asked Questions

    • Vari - Triangle Season X TA01 tyres: characteristics and opinions Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos