Do it yourself
Frequently asked questions about cars and motorcycles

What You Need to Know Before Replacing Start & Stop Batteries

Model: (Various brands) Various
Part: Battery

In this video, you will see that batteries for vehicles with Start & Stop systems can be of two types: EFB or AGM, so check which type is installed in your vehicle. An EFB battery can be replaced with either another EFB or an AGM, while an AGM can only be replaced with another AGM: in fact, the latter is a battery designed for vehicles with higher electrical consumption, equipping mild or full hybrid vehicles. Some German-manufactured vehicles have a smart sensor on the battery, so when changing the battery, it must be registered with a diagnostic device that allows adaptation to the alternator. Remember that the battery base indicates the manufacturing date, and the average lifespan of a battery is typically 5 years: after this period, it can fail at any moment.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various A question that often comes to mind is whether we can put a regular battery in a car with start & stop. The answer is: absolutely not. Cars with star…
(Various brands) Various In this video we see how to replace the battery of a Start & Stop car: There are two types of Start & Stop batteries: EFB (Enhanced Flood Battery) an…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos