Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the roof lining of the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Body

See other generations:
Video tutorial

It is not common in cars, but the roof lining may come loose and sag into the cabin, or you might notice yellowing due to age. Whether for these or other reasons, you need to remove the lining, and if you want to do it yourself, first remove the central dome light, then the covers on the structure of the front seat belts, the covers of the rear pillars, and the grab handles.

To complete the job, you must pull out the mentioned roof lining and take it out of the car.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to Remove the Roof Lining of a Volkswagen Polo
How to Remove the Roof Lining of a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This useful guide shows how to remove the roof lining of a Volkswagen Polo 6R. Start by removing the four grab handles above the doors and the two fr…
How to Remove the Interior Roof Lining of a Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Want to replace the cover panel of the Volkswagen Polo? Here’s how to remove the cover panel from under the roof of the Polo. Remove the side handles…
How to Remove the Headlining in a Volkswagen Polo?
How to Remove the Headlining in a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this tutorial, you will see how to remove the headlining in a Volkswagen Polo, a very simple and quick operation. First, go inside the cabin, then…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos