Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Find and Replace the Fuse Box on the Volkswagen New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuse box

See other generations:
Video tutorial

In today's video, the positioning and removal of the external fuse box on the Volkswagen New Beetle is shown. First, open the bonnet of the vehicle and locate the external fuse box, situated above the battery.

Disconnect both terminals (positive and negative) to proceed with the removal, as illustrated in the video. At this point, replace any blown fuses or the entire fuse box if necessary, reconnecting them; it is important that the replaced fuses have the same amperage as the previous ones!


Updated on 21 October 2026 by ScegliAuto


Related tutorials

Where to Find the Cabin Fuse Box of the Volkswagen Beetle
Where to Find the Cabin Fuse Box of the Volkswagen Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) If you own a first-generation Volkswagen Beetle and need to locate the cabin fuse box, simply follow this guide and apply the described procedure. Fi…
Where are the fuses located in the Volkswagen New Beetle?
Where are the fuses located in the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) The fuse box mounted on the Volkswagen New Beetle is responsible for containing the fuses that regulate the operation of the devices present in the c…
How to Remove the External Fuse Box of the Volkswagen New Beetle 1.8T
How to Remove the External Fuse Box of the Volkswagen New Beetle 1.8T
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Today's guide explains how to dismantle the external fuse box of the Volkswagen New Beetle 1.8T, following the instructions below. First, open the bo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos