Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlights on a Volkswagen Golf 6?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

Do you want to install an aftermarket headlight kit on your Volkswagen Golf 6, or do you need to perform maintenance, clean the lens, or something else? Well, let's observe and understand what needs to be done: Open the front bonnet, unscrew the retaining screws of the grille where the manufacturer's badge is mounted, proceed to remove the retaining pins of the headlights, visible at the top, and finally disconnect the power connector located at the back of the headlights, completing the job by pulling them outwards to detach them from the bodywork.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How do you replace the front headlights in the Volkswagen Golf 7?
How do you replace the front headlights in the Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) For those interested in removing the front headlights of their Volkswagen Golf 7, whether to replace them, install LED kit or for any other reason, y…
How to Adjust the Height of the Headlights in the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Below are the instructions that will allow you to adjust the height of the headlights in the Volkswagen Golf. First, position yourself in front of a …
How to disassemble the rear bumper on a Volkswagen Golf?
How to disassemble the rear bumper on a Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this tutorial we can see how to remove the rear bumper on the Volkswagen Golf, a very simple and fast operation. First of all, we open the rear ha…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos