Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the VW Transporter

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Service warning light

When the service light comes on a Volkswagen Transporter vehicle, it means that it is necessary to perform a car service, which includes: oil and oil filter replacement, air filter replacement, fluid check, engine and timing belt check. To reset the light, we need to: turn on the instrument panel, press the button on the left side of the instrument panel and rotate the same button until selecting the new kilometers, then press the button on the right side of the instrument panel for 5 consecutive seconds and turn off the instrument panel. To complete the reset, turn on the instrument panel.

Posted on 18 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Transporter (2003-2014 / T5, MK 5) The Service indicator that appears on the instrument panel of the Volkswagen Transporter can be reset by holding down the 0.0/SET button located on t…
Volkswagen Transporter (2014-2025 / MK 6, T6) It will be possible to completely make the Service light of the Volkswagen Transporter disappear by holding down the button located on the right side…
Volkswagen Transporter (2003-2014 / T5, MK 5) Let's discover the instructions useful for resetting the service maintenance light of the oil change on the Volkswagen Transporter. First of all, get…

Other guides you may be interested in

    Frequently Asked Questions

    • Transporter 2014-2025 - How do you turn off the service light in the Volkswagen Transporter T6? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos