|
Do it yourself
| |||
| ||||
How do you replace the rear electric window lifter of the Volkswagen Passat B8?
Model: Volkswagen Passat
B8, 3G, MK 8
- Years 2014-2023
The guide shows how to remove the electric motor of the rear window regulator of the Volkswagen Passat b8. The first operation to be performed is to remove the door panel by unscrewing the fixing screws and disconnecting the cables. At this point, it is possible to remove the absorbing panel and, using the driver's control, move the rear window until the fixing bolt is visible through the hole on the glass guide. Remove the plastic pin and lift the glass completely and lock it in position with tape. At this point, it is possible to remove the electric motor by unscrewing the three fixing screws with a Torx T25 tip and disconnecting the cable. Push the three plastic pins to release the window regulator. Remove the two fixing screws of the glass guide. At this point, it is possible to remove the last piece of the mechanism. The reassembly procedure is carried out in the reverse manner.
Posted on 24 November 2024 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Passat
(1996-2005 /
3BG, B5)
Today's steps will show us how to disassemble and replace the rear tailgate of the Volkswagen Passat. First, we open the rear tailgate and start dism…
Volkswagen Passat
(2005-2010 /
B6, 3C)
Remove the window regulator and door panel on a Volkswagen Passat by following these steps. Before starting the disassembly, disconnect the battery t…
Volkswagen Passat
(2005-2010 /
B6, 3C)
Today's instructions will show us how to disassemble and replace the bulbs in the rear headlight of the Volkswagen Passat. First, we open the rear ha…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on a Hyundai Tucson
Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.057
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |