Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the bumper of the Volkswagen Golf VI

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Front bumper

See other generations:
Video tutorial

To remove the front bumper of the Volkswagen Golf, we need to open the hood of the engine compartment, unscrew the three screws that fix the black grille of the front end and remove it. Unscrew the two screws that the removal of the grille has released, move to one of the wheel arches and detach the bumper from the fittings, helping if necessary with a plastic lever to not scratch the painted surfaces, repeat the operation also on the other side.

Remove the bumper and place it on a sheet, in front of the car, disconnect the electrical connectors to remove it permanently.


Posted on 26 December 2024 by ScegliAuto


Related tutorials

How to replace the headlight bulb on the VW Golf 7
How to replace the headlight bulb on the VW Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Replacing the headlight bulb on the Volkswagen Golf 7 is a very simple task that can be done independently. Start by opening the front bonnet and pro…
How to Remove the Front Bumper from the Volkswagen Golf?
How to Remove the Front Bumper from the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To remove the front bumper from the Volkswagen Golf, open the bonnet to access all the screws securing the bumper from the top. Then proceed to unscr…
How to Replace the Undertray on a VW Golf 8
How to Replace the Undertray on a VW Golf 8
Volkswagen Golf (2019-2026 / MK 8, Golf 8, Golf Viii) This video will explain the steps to replace the undertray on a Volkswagen Golf MK8. The first step is to lift the vehicle for better visibility and …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos