Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

Nowadays, you often hear mechanics and bodywork specialists talking about the OBD socket to check that the vehicle does not have electronic issues and more. This system allows you to quickly check and identify errors and problems and resolve them just as quickly.

For example, the OBD socket can be used to reset the service light. The diagnostic socket for the Volkswagen Golf Plus is located inside the cabin, specifically under the driver’s side glove compartment.

The OBD socket is easily identifiable by its bright pink colour.


Updated on 15 November 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) The fuse for the operation of the diagnostic socket or OBD port is located inside the fuse box situated in the cabin, specifically behind the glove c…
Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) The fuse related to the operation of the control unit (ECU) for the Volkswagen Golf model mk4, produced from 1997 to 2003, is located inside the fuse…
Volkswagen Golf (2019-2026 / Golf Viii, MK 8, Golf 8) The diagnostic port or OBD port on a 2008 Volkswagen Golf is located inside the cabin, specifically under the dashboard on the driver's side. The OBD…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos