Do it yourself
Frequently asked questions about cars and motorcycles

Reset service on a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Checks and maintenance

Today we will see how to perform the service reset on a Volkswagen Polo, fourth series model produced from 2002 to 2009. The procedure is very simple and we can do it independently after changing the engine oil, but let's see now how to proceed. First, we need to insert the ignition key and press and hold the speedometer button and then turn on the car's instrument panel without starting the engine. Once this is done, release the button and turn it clockwise to complete the operation as shown in the video, finally restart the vehicle to verify the successful completion of the procedure.

Posted on 15 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) Here you will learn how to reset the service warning for the engine oil change on a Volkswagen Polo, as well as on a Tiguan. First, get inside the ve…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Briefly, here are the instructions to reset the service interval on the Volkswagen Polo. First, get in the vehicle and press and hold the reset butto…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Before you begin, sit in the driver's seat of your Volkswagen Polo. Start by pressing and holding the button located beneath the speedometer. At the …

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos